The Best Japanese Pull Saws
Japanese-style pull saws are a miracle for those of us needing to cut down trim in tight spaces. One project where a good japanese pull saw is needed is when installing hardwood flooring or tile where you need to cut down existing door trim. Another is fine woodworking and this type of saw is certainly a fine woodworking tool.
We researched several of the most popular pull saws and chose the best japanese pull saws below.
The SUIZAN Japanese hand saw pull saw is a Japanese style hand saw that is a pull saw working for both soft wood and hard wood such as tiger maple, teak and even drift woods. This is the longest blade in their lineup and it contributes to cutting power and easy handling. The saw blade is easily handled and is powerful since it is the longest blade. You can easily remove and interchange the saw blade. Master craftsmen from Japan fashion all SUIZAN products. The maker claims that their products are the best on the market because of the way that they are made to stand up against any other brand of product in this category.
The Gyokucho 770-3600 razor ryoba saw with blade is a modern variation of the traditional Japanese pull-stroke saw. It is two saws in one so you use the finer side for crosscut work and turn it over to use it for rip work. The .5mm thick blade gives a fine kerf. This is a good saw and Japanese saw cut on pull stroke. Position yourself so you are holding the saw at a 45-degree angle. The tip of the handle should be pointing toward the floor and pulling down into the cut. This saw is going to help you work more efficiently when you are working on a project. No matter what project you are working on, you will be able to use this saw to start working and being able to get the results that you want with a high quality product.
The SUIZAN Japanese hand saw 6-inch Dozuki (Dovetail) pull saw is great for woodworking as this Japanese style hand saw “pull saw” is used for both soft wood and hard wood. The 0.00047 inch blade is the best size for highly precision work and is made of top quality Swedish steel. There are 25 teeth per inch and the blade thickness is 0.012 inch, the kerf width is 0.016 inch, the blade length is 6 inches and the overall length is 15-1/2 inch. The saw blade is easily removable and interchangeable and there are replacement blades that are easy to purchase and use. You are able to customize your experience and get the results that you want with this saw so you are able to do the job that you set out to do.
This SUIZAN Japanese hand saw pull saw cuts off the excess wood without damaging the surrounding. The thin blade is able to bend to be pressed against the surface so the cut end will be completely flat. There are 32 feet per inch, the blade length is 7 inches, the overall length is 16 inches. The saw blade is easy to interchange and you are able to buy replacement blades. When you remove the handle, the saw can easily fit into your toolbox. If you want a saw that is easy to use and easy to handle then this is a great choice for you. Whatever toolbox or workshop you have, you will be able to use this as a good addition to your collection. The saw only weighs 6.2 ounces so it is not heavy when you are trying to use it or carry it. When you have this saw, you will be able to make as many precision cuts as you would like to make without having to worry about it.